Hello everyone, if you’re reading this, thank you very much for taking the time to look at my first blog. I’m starting to post blogs about the projects I’m working on in hopes that it will improve my chances of employment. Come on, let’s face it, there is nothing stopping anyone from typing my name in a google search bar just to see what shows up so I figured, instead of viewing the silly stuff on face book, maybe something more positive can be made of this. The one thing I noticed in a job interview is that the people interviewing you don’t actually know what you can do; all they have to go on is the words on a resume. At least this way, I can give them a virtual tour of myself and technology of the 21st century.
Over the summer of year 2010, I started putting together my own data acquisition system. I got into building this after I have taken a class on DAQ technology at Red River College for my Instrumentation Engineering courses. We were using LabVIEW 2009 (however I recently upgraded to LabVIEW 2010) to explain how analog signal data is read by computers. It is basically the process of taking an analog signal, digitizing it so the computer can understand the data, then converting that digital computer processed signal back to analog again. A good example of that would be using an Audio Recorder that makes MP3 files when you talk into it. Your voice is the analog signal, it has to be converted to digital, handled by the microcontroller inside the recorder, than converted back to analog and out the speaker so you can hear what was recorded. However this system is far more complex then that.
What I did to get started was simple; I first went to the wonderful world of eBay and started looking for old National Instruments PCI DAQ cards that people were getting rid of. You wouldn’t believe what people were throwing away on there, some of the PCI cards were worth hundreds of US dollars that were very cheap to buy. Over time, I came across 3 really good DAQ cards, a NI PCI-6031E card (which has 64 analog inputs, 2 analog outputs and 8 digital input/output leads), a NI PCI-6509 card (which as 96 digital input/output leads), and a NI PCI-6704 card (which has 32, 16 bit analog outputs and 8 digital input/output leads). The next step was to find a way to make this portable. My solution was to get a StarTech PCI expansion board because it would give me a box with 4 PCI slots and a PCI Express 1x desktop PC interface card plus an ExpressBus 34 interface for my laptop much like you see on this photo…
I have to say, this little StarTech box was amazing. It was only 200 US dollars on eBay, and it worked flawlessly in all my computers except for 1, my laptop. I don’t blame the hardware, this was a problem caused by human error. My laptop only has PCMCIA card slots in it, this PCI expansion bus requires ExpressBus to use. Even with a PCMCIA to ExpressBus converter, I couldn’t make it work because the PCI bus required signals passed through an ExpressBus port that my laptop wasn’t capable of generating. So, I had to find an alternative.
Lucky for me, I did find an alternative. Instead of using a StarTech system, I had to go for a Magma PCI Expansion system. I had been trying to avoid a Magma system because the hardware is extremely expensive. A 4 slot PCI expansion bus kit would cost you $1,500 if you purchased it brand new. Lucky for me, I got a reasonable deal on eBay for the exact same system; it was just a little bit used and had some dust with brown tar inside it from the residue of second hand cigarette smoke. I loaded the cards inside the box, along with a PCI SATA 2 card and 4 extractable hard drive bays, and then bought a CBHIF68 interface for the box (that’s a PCMCIA interface card so it can plug into my laptop).
The next step was to get the 68 pin and 100 pin connection cables needed to interface with the DAQ cards inside the black Magma PCI expansion box. They were almost $90 per cable but I had no choice, there was no other way of interface to the hardware without them. I then needed terminal boxes that would plug into the other ends of the cables. This made me mad, everywhere I went; everyone wanted $500 for one of these SCB100 terminal boxes! Ya…500 bucks! Can you believe it? All the boxes had was a metal enclosure case, some screw terminals, and a big 100 pin interface plug in it. So, I was like “This is nuts, there is no way I’m paying 500 dollars on something as cheap as that! Time to put my brain to work!” and I did just that. What did I come up with? My own professionally made circuit boards. They are in the next set of photos, made with a black silkscreen. It took me 6 months to design them, just a board with screw terminals and some plugs, 6 months to do an epic job. However, I got all the parts and circuit boards both together for a total of $400, and they even have my name printed in the silk screen….”Designed by Matt Fryatt”, it just doesn’t get any better than that.
 |
| This pneumatic differential pressure sensor will hopefully never be a problem again when using the DAQ measurement system |
So now that I have the power to automate all the homes on my city block using my laptop…what was the purpose of this project? Well, last year, I watched everyone struggle with the Linear Process Controls class. Lucky for me, I dropped the class because I just don’t have the ability to do 9 college classes all at once (but 7 classes are ok). However this gave me plenty of time to sit back, pull up a chair, and watch everyone needlessly struggle with their labs. I had to think, “Next year I’m going to take this class again, how can I prevent myself from going through this chaos?” That’s when I got the idea about setting up this DAQ system. I wanted to interface this hardware to the technology we will be using for the labs to get more accurate readings for the reports. Plus, now that I can gather the data to my computer, I can get my teacher to just simply walk to my laptop screen to see if the data I collected is acceptable or not. Hopefully this will cut down the time I sped with the teacher so that I don’t take away help time from others who are doing their labs. Also for an added bonus, if I can get my computer to gather the data, then I can have it automatically generate my lab reports too on the spot. I predict this should cut down the time needed to study and do home work.
Thank you again for reading my blog
